CYBEX FT-325 User Manual

14
Cybex FT-325 Owner’s Manual
If Then
FT-325cannott
through doorway
Remove BHSCS and locknuts, remove one side of connector tubes 13.
using a 7/32” Allen wrench and a 9/16 wrench.
Tube
connector
Move machine to desired position.14.
Reattach frame halves and securely tighten the BHSCS.15.
Place two drops of Loctite 242 to each BHSCS and threaded hole 16.
for Chin up bar. Securely tighten BHSCS.
Insert plastic plugs. 17.
Securelyanchormachinetotheoor
Cybex strongly recommends to maximize stability, equipment must be secured to a solid level
surface.
CAUTION: Cybex is not responsible for the actual anchoring of equipment. Consult with
a professional contractor..
WARNING: Use fasteners having a minimum of 500 lbs. tensile capacity (3/8’’ grade 2
bolts or better).
WARNING: If legs/frame does not contact surface, DO NOT pull down with anchors. Shim
any leg or frame not in contact with surface using at washers.

CYBEX FT-325 Specifications

General

Brand	CYBEX
Model	FT-325
Category	Fitness Equipment
Language	English