Need help?Do you have a question about the CYBEX JUNO M-FIX and is the answer not in the manual?
General| Product Type | Car Seat |
|---|---|
| Type | Forward facing |
| Installation Method | Isofix |
| Safety Standard | ECE R44/04 |
| Safety Standards | ECE R44/04 |
| Side Impact Protection | Yes |
| Impact Shield | Yes |
| Adjustable Headrest | Yes |
| Reclining Positions | Yes |
| Recline Positions | Multiple |
| Group | Group 1 |
| Child Weight | 9 kg to 36 kg |
| Age Range | 9 months to 12 years |
| Installation | ISOFIX |
| Safety Features | Impact shield |
| Harness System | 5-point |
Highlights the absolute necessity of using the car seat as described in the manual for proper child protection.
Crucial safety warnings regarding modifying components, reading instructions, and avoiding jamming parts.
Discusses correct positioning in the vehicle, including considerations for airbags and general vehicle manufacturer recommendations.
Warnings about using the car seat with two-point or lap belts and incorrect diagonal belt routing.
Warnings about side-facing seats, rear-facing installation, and leaving children unattended.
Emphasizes securing the car seat even when not in use, and the importance of proper seat positioning.
Step-by-step guide to extending, rotating, and connecting ISOFIX connectors to vehicle anchorage points.
Instructions on checking release buttons, safety indicators, and securing the seat by trying to pull it out.
Steps to unlock and retract ISOFIX connectors for removal from vehicle anchorage points.
Instructions for adjusting the L.S.P. to one of its three positions for optimal protection, including interaction with car doors.
Detailed steps on how to route and tighten the vehicle's three-point belt through the impact shield for fastening.
Emphasizes checking belt tightness, correct adjustment, and avoiding twisted belts.
Advises contacting the retailer for questions after an accident and preparing specific details about the product and child.
Warning that the seat cover is an integral part of the safety design and must not be used without it or with a different one.
To Next Page
