Cybex MG-525 Owner’s Manual
Safety
Page 1-1
Safety
Read the Owner’s Manual carefully before assembling, servicing or using the equipment.
It is the responsibility of the facility owner and/or owner of the equipment to instruct users on proper
operation of the equipment and review all labels.
WARNING: Serious injury could occur if these safety precautions are not observed:
User Safety Precautions
Obtain a medical exam before beginning any exercise program.•
Stop exercising if feeling faith, dizzy or experiencing pain and consult your physician.•
Obtain instructions before using.•
Read and understand the owner’s manual and all warnings posted on the machine before using.•
Keep all children (12 and under) away. Teenagers (13 and over) and disabled must be supervised.•
Keep body and clothing free from and clear of all moving parts.•
Use the machine only for the intended use. • DO NOT modify the machine.
Inspect machine prior to use. DO NOT use if it appears damaged or inoperable.•
Inspect all cables and belts and connections prior to use. DO NOT use if any components are worn, •
frayed or damaged.
DO NOT • attempt to fi x a broken or jammed machine. Notify fl oor staff.
DO NOT• use if guards are missing or damaged.
Be sure that the weight pin is completely inserted. Use only the pin provided by the manufacturer. •
If unsure seek assistance.
Never pin the weights in an elevated position. • DO NOT use this machine if found in this condition. See
assistance from fl oor staff.
DO NOT • use dumbbells or other incremental weights, except those provided by the manufacturer.
Report any malfunctions, damage or repairs to the facility. •
Replace any warning labels if damaged, worn or illegible. •
Facility Safety Precautions
Read the Owner’s Manual carefully before assembling, servicing or using the equipment. •
Securely anchor each machine to the fl oor using the anchor holes provided in each machine.•
NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult with a professional
contractor.
NOTE: Use fasteners having a minimum of 500 lbs. tensile capacity (3/8” grade 2 bolts or better).
NOTE: If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any
leg or frame not in contact with surface using fl at washers.
1 - Safety
To Next Page
Loading...
Need help?
General
