Note: If the Lifepulse system sensors are grasped while the chest strap is worn, and if the signals from the
sensors are valid, the on-board computer uses these sensor signals for calculating the heart rate instead of
those transmitted by the Polar telemetry heart rate chest strap.
Note: (Treadmills Only): During the setup of a heart rate zone training workout, the user will be required
to enter a start-up speed. If a Polar telemetry heart rate chest strap is not detected, the maximum allowable
speed is 4.5 mph. If a Polar telemetry heart rate chest strap is detected, users can workout at the maximum
allowed speed set in Manager’s Configuration.
Page 16 of 23