Assembly
Page 4-4
Cybex VR3 12180 Tricep Press Owner’s Manual
NOTE: It is important that you perform regular inspection and maintenance activities on your equipment.
See the CYBEX Owner’s Manual for inspection and maintenance activities. If you do not have a
CYBEX Owner’s Manual or if you have any questions or concerns, call CYBEX Customer Relations
at 888-462-9239.
9. Verify proper operation
10. Securely anchor machine to the fl oor.
Securely anchor machine to the fl oor using A.
the anchor holes provided in each machine.
NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult with a professional contractor.
NOTE: Use fasteners having a minimum of 500 lbs. tensile capacity (3/8’’ grade 2 bolts or better).
NOTE: If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any leg or
frame not in contact with surface using fl at washers.
To Next Page
Loading...
