CYBEX VR3 - Component Inspection and Lubrication; Yearly Procedures

Cybex VR3 12180 Tricep Press Owner’s Manual
Maintenance
Page 5-6
Yearly Procedures
1. Replace all belts cables at least annually.
4. Inspect bars and handles for wear, paying particular attention to tab area connecting points.
Replace all worn handles immediately.
5. Inspect snap links for proper latching (indicates wear).
Replace all worn snap links immediately.
6. Inspect for loose or worn grips.
Replace all loose or worn grips immediately.
7. Inspect all labeling for readability. This includes instructional placards, warning and caution decals.
Replace all worn labeling immediately.
8. Inspect all weight stacks for proper alignment and operation.
Correct all improper alignment and operation issues immediately.
9. Wipe Weight Stack Guide Rods clean over entire length. Lubricate with a light coat of medium weight
automotive engine oil.