Joule 2.0 User Guide page 49
Setting up Cadence Sensors
Joule 2.0 is compatible with many ANT+ cadence sensors, each having a unique code. A sensor is
defi ned as any ANT + compatible power meter, cadence sensor, speed sensor, heart rate strap and
CycleOps resistance unit. Joule 2.0 needs to be paired to each sensor to ensure proper functional-
ity. Once set up, sensors can be managed using PowerAgent software. Note: some power sensors
do not require a separate cadence sensor in order to display cadence data.
1. Press and release the [MODE] button until Main mode is displayed.
2. Press [JOYSTICK] in and release to select Sensors.
3. Press [JOYSTICK] in and release to select Cadence Sensor.
4. Press [JOYSTICK] up/down to highlight Add New Sensor. Press [JOYSTICK] in and release to select Add New
Sensor.
5. Make sure the power sensor is awake and isolated from other active sensors by 65 feet/20 meters. Rotate the
crank to wake up the cadence sensor.
6. Press the [JOYSTICK] in and release to Start Pairing. Pairing may take up to 60 seconds. Once pairing is suc-
cessful, the sensor ID will be displayed.
The sensor is automatically activated after successfully pairing.
7. Press [JOYSTICK] up/down to highlight Name. Press [JOYSTICK] in and release to select Name and change
the name of the paired power sensor. Press [JOYSTICK] in and release to save changes.
8. Once a sensor has been paired and activated Joule 2.0 will automatically fi nd the active sensor whenever it is
turned on.
Chapter 6: Sensors
To Next Page
Loading...
