Joule 2.0 User Guide page 51
Setting Up Heart Rate Sensors
Joule 2.0 is compatible with ANT+ heart rate sensors, each having a unique code. Joule 2.0 needs
to be paired to each sensor to ensure proper functionality. Once set up, sensors can be managed
using PowerAgent software.
1. Press and release the [MODE] button until Main mode is displayed.
2. Press [JOYSTICK] in and release to select Sensors.
3. Press [JOYSTICK] up/down to highlight Heart Rate Sensor. Press [JOYSTICK] in and release to select Heart
Rate Sensor.
4. Press [JOYSTICK] up/down to highlight Add New Sensor. Press [JOYSTICK] in and release to select Add New
Sensor.
5. Make sure the Heart Rate Sensor is being worn and isolated from other active sensors by 65 feet/20 meters.
6. Press the [JOYSTICK] in and release to Start Pairing. Pairing may take up to 60 seconds. Once pairing is suc-
cessful, the sensor ID will be displayed.
The sensor is automatically activated after successfully pairing.
7. Press [JOYSTICK] up/down to highlight Name. Press [JOYSTICK] in and release to select Name and change
the name of the paired heart rate sensor. Press [JOYSTICK] in and release to save changes.
8. Once a sensor has been paired and activated Joule 2.0 will automatically fi nd the active sensor whenever it is
turned on.
Chapter 6: Sensors
To Next Page
Loading...
