CycleOps PowerTap User Manual

TTOORRQQUUEE FFUUNNCCTTIIOONN
Shows the torque placed on the hub in inch-pounds. To display torque
in trip mode:
1) Press [MODE] to scroll the cursor to the top line of the main display.
2) Press [SELECT] until the current power function is displayed.
3) Hold [SELECT] until the word ‘WATTS”begins to flash. A blinking “WATTS”display indicates
the torque function is currently displayed.
4) Press [SELECT] to return to the current power function.(FIGURE 12).
3
MI
D
000
25
58.I0
IMPORTANT: ZERO TORQUE
Frequently
the torque must be zeroed to ensure the most accurate power
information is displayed. If the current power display is positive or
negative while coasting the torque must
be zeroed. This operations must
be done while coasting with no
tension on the chain, no tension placed on
the pedals, and the transmission icon must be illuminated. To zero torque:
1) Press [MODE] to scroll the cursor to the top line of the main display.
2) Press [SELECT] until current power function is displayed.
3) Hold [SELECT] until the word “WATTS” begins to flash to enter the
torque function.
4) Hold [SELECT] again until “0” is shown.
5) Press [SELECT] to return to current power. The current power function
will now read zero while coasting.
14
FIGURE 12

CycleOps PowerTap Specifications

General

Brand	CycleOps
Model	PowerTap
Category	Bicycle Accessories
Language	English