Attaching the Wheels
1. Insert the wheel axle into the axle receiver on the trailer body as shown.
2. Locate the through-hole on the wheel axle and secure the wheel by using the tethered spring clip pin.
2. Pull firmly on the wheel to confirm the axle is fully secure.
WARNING! You must make certain the frame and wheels are locked before using the trailer. Fail-
ure to do so could result in serious injury. Make sure the cabin assembly is securely locked together in
place before use.
6
Using Lock Pin & Spring Clip Fasteners
To use the lock pin and spring clip fasteners, insert the pin at attachment
point until it pushes through the opposite hole. Rotate the spring clip up and
over until it snaps into place over the pin head. To unlock, reverse order.
To Next Page
Loading...