Attaching the Trailer to a Bike
Your trailer is designed to attach easily to just about any full-size bicycle. Once installed the hitch con-
nector can be left on the bicycle and the trailer released using the spring clip.
The hitch fitting must be attached to the left rear axle of the bike. Do not attach to any cycle where
it cannot attach to the axle. It is recommended that the bicycle(s) to which the trailer will be attached
undergo a safety check by a qualified bicycle mechanic before attaching the trailer to it. This trailer is
not designed to be used with electric bikes or motorcycles.
Note: Additional hitch connectors for use on multiple bikes can be purchased at
www.cyclicsports.com.
8
To Next Page
Loading...