CHARGING THE BATTERY
Your Fly6 comes partially charged however before using it
for the rst time, fully charge the device for maximum results.
1 — Connect device to
computer using the
supplied USB cable
2 — Charge indicating
light will illuminate
indicating the device
is charging
3 — When the device is
fully charged the LED
will turn off
NOTE
The time to charge from at to fully charged varies from 3 to 6 hours depending on method of
charging i.e. mains power USB (not supplied) or computer USB. For maximum Battery life, fully
discharge the Battery before re-charging. Battery life diminishes over time.
WWW.CYCLIQ.COM 17
To Next Page
Loading...
