LOOPING FUNCTION
Your Fly6 is designed as a ‘set and forget’ cycling accessory - all
you should need to do is charge it when necessary. As such, the
footage is continuously recording onto the microSD card until
there is no space left, then it records over the oldest footage until
there is no space left then repeats. This way, you never have to
worry whether anything is being captured - it just is!
The looping function cannot be turned off. This is to ensure that
you do not forget to record your ride. If you want to keep all of
your ride footage without looping over it, you will have to get a
greater capacity microSD card (up to 32Gb is compatible - this
should give you up to 8 hours of recording capacity before the
looping function kicks in). Alternatively you can remove the
microSD card when the capacity is reached and replace with a
new microSD card.
WWW.CYCLIQ.COM 29
To Next Page
Loading...
