Why does my cycliq Fly 6 make three loud beeps?
Your Cycliq Camcorder might emit three loud beeps for two reasons: either the battery has depleted to 5% or less, in which case only the camera and audio functions are shut down, leaving the flashing lights functioning for up to 1.5 hours; or the device has just shut down because the Incident Capture mode was triggered 1 hour prior.
General| Water Resistance | IP56 |
|---|---|
| Frame Rate | 30 fps |
| Loop Recording | Yes |
| Resolution | 1080p (1920 x 1080) |
| Field of View | 135 degrees |
| Viewing Angle | 135 degrees |
| Storage | MicroSD |
| Light Modes | Flash |
Lists all items provided in the Fly6 package, including the device and accessories.
Outlines the intended use of Fly6 and limits liability for damages arising from device malfunction.
Warns against recording copyrighted material without permission and highlights legal implications.
Provides essential safety, operating, and care guidelines for optimal device use.
Lists critical warnings including no modifications, keeping away from children, and proper battery disposal.
Details the front view of the Fly6, identifying the camera, strobe light, and charge indicator.
Details the back view of the Fly6, identifying the speaker and mounting spine.
Details the side view of the Fly6, identifying the power button and flashing mode controls.
Details the side view of the Fly6, identifying the MicroSD and Micro USB ports and courtesy dimmer.
Explains how to charge the Fly6 battery using a USB cable for maximum results.
Describes audible signals indicating the current battery level upon powering up or down.
Guides users on how to set the date and time by modifying a CONFIG.TXT file.
Provides step-by-step instructions for mounting the Fly6 onto a standard bicycle seat post.
Details the process of mounting the Fly6 onto an aero seat post using specific spacers.
Explains the procedure for powering the Fly6 on and off using the power button.
Describes how to toggle between different lighting modes using the power button.
Outlines how to adjust the brightness and select illumination modes using the dimming button.
Explains the two methods for accessing recorded footage from the Fly6.
Guides users on how to view recorded video files using compatible media players.
Recommends software for editing recorded video footage from the Fly6.
Suggests a free tool for converting video footage recorded by the Fly6.
Explains the continuous recording feature that overwrites oldest footage when storage is full.
Details the feature that saves footage automatically after a detected incident like a fall.
To Next Page
