The CBT-STAT and CBT-STAT-H provide dedicated, visually
appealing Room Control displays for use with CBV and CBT
Unitary Controllers.
Both displays allow the user to view and adjust selected
7parameters within the controller to which they are connected,
and each has an integrated temperature sensor. The CBT-STAT-
H also has an integrated humidity sensor.
While the display can be used for local control, the CBT12iVAV
and CBT14 Unitary Controllers can be easily integrated into the
Cylon Controls BACnet system architecture.
By default the CBT-STAT and CBT-STAT-H operate in User mode
– see User Mode on page 8 for details.
The CBT-STAT or CBT-STAT-H can be put into Engineering Mode,
allowing the display to be used as a commissioning tool,
adjusting preset points in the Unitary Controller’s default
strategy. See Engineering Mode on page 12.
To Next Page
Loading...
