CYP CH-U331RX - Page 23

19
6. Serial
COMMAND DESCRIPTION AND PARAMETERS
SET_SERIAL_BAUD N1 Set the Serial baud rate.
Available values for N1:
0 [300]
1 [600]
2 [1200]
3 [2400]
4 [4800]
5 [9600]
6 [19200]
7 [38400]
8 [57600]
9 [115200]
GET_SERIAL_BAUD Show the current Serial baud rate.
SET_SERIAL_BITS N1 Set the number of Serial data bits.
Available values for N1:
0 [5 bits]
1 [6 bits]
2 [7 bits]
3 [8 bits]
GET_SERIAL_BITS Show the current number of Serial
data bits.
SET_SERIAL_PARITY N1 Set the Serial parity bit.
Available values for N1:
0 [None]
1 [Odd]
2 [Even]
GET_SERIAL_PARITY Show the current Serial parity bit.
SET_SERIAL_STOP N1 Set the Serial stop bits.
Available values for N1:
0 [1]
1 [2]
GET_SERIAL_STOP Show the current Serial stop bits.