39
6.10.1 Video Switch
This page provides video routing settings including HDCP and test
pattern conguration.
Output and Input Routing
To begin assigning a new video route, please click the button of the
HDBaseT output you wish to send video to (e.g. “HDBT_Out A”) and then
click on the button of the preferred HDMI input port (e.g. “HDMI_In 1”). If
desired, you may select more than one output prior to selecting the input.
As you select each button they will change their colour to orange. The
new route will become active immediately and the routing information
displayed on the buttons will change accordingly.
If you need to route an input to multiple outputs, please select all of the
appropriate output buttons before selecting the input port.
To Next Page
Loading...