11
12
HDCP ON/OFF: Press to switch between supported HDCP versions
or to disable HDCP. Within Analyser mode, OFF (LED=Off), HDCP 1.4
(LED=Red), and HDCP 1.4+2.2 (LED=Blue) modes are available for the
input port. Within Pattern mode, OFF, HDCP 1.4, and HDCP 2.2 modes
are available for the output port.
13
COLOR SPACE: Press repeatedly to switch between the available
colour space formats. The button’s LED is coloured to indicate the
current colour space: Red=RGB, Blue=YCbCr 4:4:4, Purple=YCbCr 4:2:0,
Off=YCbCr 4:2:2.
14
DEEP COLOR: Press repeatedly to switch between the available
output colour bit depth options. The button’s LED is coloured to
indicate the current bit depth: Off=8-bit, Red=10-bit, Blue=12-bit.
15
OUTPUT FORMAT: Press to switch between DVI (LED=Blue) and HDMI
(LED=Red) output formats.
Disable Output: Press and hold the button for 2 seconds to disable/
enable video output completely. The button’s LED will turn off when
output is disabled.
6.2 Top and Bottom Panels
VGA OUT
HDMI OUT
AUDIO OUT
HDMI IN
AUDIO IN
4 5
321
1
AUDIO OUT: Connect to powered speakers or an amplifier for stereo
analogue audio output with a 3.5mm phone jack cable.
2
VGA OUT: Connect to a VGA (RGBHV) monitor or display for analogue
video output.
To Next Page
Loading...