CYP XA-4 - Left and Right Panels

12
3
HDMI OUT: Connect to HDMI TVs, monitors or amplifiers for digital
video and audio output.
4
HDMI IN: Connect to HDMI source equipment such as a media player,
game console or set-top box.
5
AUDIO IN: Connect to the stereo analogue output of a device such as
a CD player or PC.
6.3 Left and Right Panels
POWER
CONTROLRS232 SERVICE
DC 5V
2 3 4 5
1
1
POWER: Flip this switch to turn the unit ON or OFF after connecting
an appropriate power source.
2
CONTROL: Connect directly, or through a network switch, to your PC/
laptop to control the unit via Telnet.
3
RS-232: Connect directly to your PC/laptop to send RS-232 commands
to control the unit.
4
SERVICE: This slot is used for firmware updates and uploading
customer designed test pattern files.
Note: The patterns are restricted to 640×480 and 1920×1080. Both must
be 24-bit RGB bitmap files
5
DC 5V: Plug the 5V DC power supply into the unit and connect it to
an AC wall outlet for power or use the DC to USB adapter cable to
connect to a portable USB power bank (2.1A minimum) for power.