6
1. INTRODUCTION
This HDMI Signal Generator & Analyser is an advanced and handy tool
for generating, testing and verifying the signal path within your 18Gbps
HDMI ecosystem. With 90 built-in resolutions, 58 test patterns and over
a dozen types of A/V analysis functions, this unit provides an enormous
range of testing options. HDMI data packet, EDID and HDCP analysis is
supported along with EDID upload and emulation. Additionally the Status
and Control Data Channel (SCDC) can be monitored, allowing HDMI
18Gbps signal detection and analysis. Up to 8 channels of LPCM audio
test tones can be generated with a wide range of frequencies.
This unit also supports the ability to upload up to 2 user-generated
graphic files which can be used as additional test patterns. The use of
multi-function and multi-colour backlit buttons allows for easy operation
of the unit’s wide variety of functions and a clear OLED display provides
a way to quickly view the current signal status information. In addition to
the front panel buttons, the unit can also be controlled via RS-232, Telnet,
and IR providing a complete range of control options.
2. APPLICATIONS
Installer/Integrator multi-function test tool
HDMI source and sink testing
UHD system/SCDC error identification
Third-party equipment setup
Source and sink EDID reading, writing and saving
HDCP compliance verification
Production testing
R&D design and testing
3. PACKAGE CONTENTS
1×HDMI Signal Generator & Analyser (Bench Version)
1×5V/2.6A DC Power Adapter
1×DC to USB Type-A Power Cable
1×Remote Control (CR-174)
To Next Page
Loading...