CYP XA-4 - Page 17

17
ANALYSER MODE
LEVEL 1 LEVEL 2 LEVEL 3
RX Port Controls SCDC Port
*PoR
On
Off
SCDC CED Ch Auto Clear On
Off
!
Auto clear while source reads CED.
Output Resolution See “Test Timing List” below
(T66 1080p60)
OSD Settings H Position 0% ~ 100% (10%)
V Position 0% ~ 100% (10%)
Transparency 0 ~ 7 (4)
A Mode Colour
(Analyser mode only)
Red
Blue
Black
P Mode Colour
(Pattern mode only)
Red
Blue
Black
Font Type Narrow
Wide
Ethernet IP Mode DHCP
Static
IP Address X.X.X.X (192.168.1.50)
Subnet Mask X.X.X.X (255.255.255.0)
Gateway X.X.X.X (192.168.1.254)
Setup Firmware Update No/Yes
Image 640×480 Update No/Yes
Image 1920×1080 Update No/Yes
[Letter H] Option 2 Small
Medium
3D Source Image Bypass No/Yes