50
COMMANDS
DESCRIPTION VARIABLES
$COLOR_SPACE N1
Set the output colour space. Available values for N1:
RGB [RGB 4:4:4]
Y444 [YCbCr 4:4:4]
Y422 [YCbCr 4:2:2]
Y420 [YCbCr 4:2:0]
$COLOR_SPACE?
Display the current output colour space.
$DEEP_COLOR N1
Set the output colour bit depth. N1 = 8, 10, 12
$DEEP_COLOR?
Display the current output colour bit
depth.
$EDID_COPY_SINK N1
Copy the current HDMI sink’s EDID to
the designated copy slot.
N1 = C1 ~ C10
!
If the copy fails “$err” will be displayed.
$EDID_MANUF? N1
Display the manufacturer name stored
in the EDID of the selected location.
Available values for N1:
RX [HDMI Input (Rx) Port]
SINK_H [HDMI Sink]
SINK_V [VGA Sink]
!
If the EDID fails to be read, "$err_ddc" will be displayed.
If the EDID has invalid content, "$err_bad" will be displayed.
$EDID_MODEL? N1
Display the model/monitor name
stored in the EDID of the selected
location.
Available values for N1:
RX [HDMI Input (Rx) Port]
SINK_H [HDMI Sink]
SINK_V [VGA Sink]
!
If the EDID fails to be read, "$err_ddc" will be displayed.
If the EDID has invalid content, "$err_bad" will be displayed.
To Next Page
Loading...