Question 5: What should I do if the remote control prompts “The left
battery in the battery compartment is in poor contact, please return or land
as soon as possible”, “The battery in the battery compartment is in poor
contact, please return or land as soon as possible”, or “The battery output
power is insufficient, please return or land as soon as possible”?
Answer: The above are normal conditions. You can continue to fly, and this
alarm will appear when you use TK3 to power the drone. Such an alarm
occurs because the UAV is first powered by TK3 when TK3 is working. When
the TK3 power supply can meet the power consumption of the UAV, the
battery will have neither power output nor power output, which triggers
the drone alarm, but there will be no impact on flight safety.
Question 6: What should I do if the remote control prompts “The battery
temperature is too low to take off, please wait for the battery to heat up to
more than 10℃ or preheat the battery in advance” during the TK3 tether-
ing?
Answer: Put the two batteries into the UAV, turn on the UAV power, wait for
the battery heating to complete, and then connect the UAV battery with the
TPYE-C on the ground end.
72
To Next Page
Loading...