APPENDIX
To connect to the network, make sure
the network adapter in your computer is
configured properly. Here’s how to
configure the network adapter to obtain
an IP address automatically for the DI-
614+ Wireless Router.
For Microsoft Windows XP:
Go to Start > right click on My
Network Places > select Properties >
Double-click on the Network
Connection associated with the
Ethernet adapter (i.e., D-Link DFE-
530TX+).
Click Internet Protocol (TCP/IP)
Select Obtain an IP address
automatically
Restart your computer,
if required
Click Properties
Click OK
To Next Page
Loading...
