35D-Link COVR-3902 User Manual
Section 3 - Conguration
Connected Clients (continued)
You can also create new client rules, allowing or blocking user-dened clients
from accessing your network.
To create a client rule, click the plus icon.
Name: Enter a custom name for this client.
MAC Address: Enter the MAC address of the device.
Reserve IP: Enable to reserve this IP address for this client.
IP Address
(Reserved):
Specify an IP address for the COVR-2600R's DHCP server to assign.
Parental Control: Allow or block access to the router.
Schedule: If Parental Control is enabled, use the drop-down menu to select
the time schedule that the rule will be enabled for. The schedule
may be set to Always O, or you can create your own schedules in
the Schedules section. Refer to Schedule on page 88 for more
information.
Click Save when you are done.