D-Link Covr - Network

41D-Link COVR-1102 User Manual
Section 3 - Conguration
Network
This section will allow you to change the local network settings of the master
COVR Point and congure the DHCP settings. In the Settings menu on the bar
on the top of the page, click Network. Click Advanced Settings... to expand
the list and see all of the options.
Network Settings
LAN IP Address: Enter the IP address of the master COVR Point. The default IP address
is 192.168.0.1.
If you change the IP address, once you click Save, you will need
to enter the new IP address in your browser to get back into the
conguration utility.
Subnet Mask: Enter the subnet mask of the router. The default subnet mask is
255.255.255.0.
Management
Link:
The default address to access the web conguration utility is
http://COVR.local/ Here, you can replace "COVR" with a dierent
name. If you change the management link, you will be required to
browse to the new URL in order to access the web UI.
Local Domain
Name:
Enter the domain name (optional).
Enable DNS Relay: Disable to transfer the DNS server information from your ISP to your
computers. If enabled, your computers will use the master COVR
Point for a DNS server.