D-Link DAP-1360 Quick Installation Guide

DAP-1360 Quick Installation Guide
Right after the first access to the web-based interface you are forwarded to the
page for changing the administrator password specified by default.
Enter a new password in the Password and Confirmation fields (you may
use digits, Latin letters (uppercase and/or lowercase), and characters available
on the keyboard), then click the Save link.
!
Remember or write down the new password for the administrator
account. In case of losing the new password, you can access the settings
of the access point only after restoring the factory default settings via
the hardware WPS/RESET button. This procedure wipes out all
settings that you have configured for your device.
15

D-Link DAP-1360 Specifications

Power

power input	5V DC/1.2 A
power adapter socket	external power adapter

Operating Environment

operating temperature	0 ˚C to 55 ˚C
storage temperature	10 ˚C to 70 ˚C
operating humidity	10% to 90% non-condensing

Weight and Dimensions

weight	215 grams
dimensions	147.5 x 113 x 31.5 mm