Need help?Do you have a question about the D-Link DAP-X3060 and is the answer not in the manual?
General| Product Type | Wireless Access Point |
|---|---|
| Wireless Standard | Wi-Fi 6 (802.11ax) |
| Maximum Data Rate | 3000 Mbps |
| MU-MIMO | Yes |
| OFDMA | Yes |
| Beamforming | Yes |
| Mounting | Wall or Ceiling |
| Antenna Type | Internal |
| Frequency Band | 2.4 GHz and 5 GHz |
| Security | WPA3, WPA2, WPA |
| Management | Web-based UI |
| Power over Ethernet (PoE) | Yes |
| Ethernet Ports | 1 x Gigabit Ethernet (10/100/1000 Mbps) |
Explains D-Link's Nuclias Connect as a centralized management solution for SMB networks.
Lists the primary functionalities and benefits of the Nuclias Connect management solution.
Lists the physical items included in the DAP-X3060 access point package.
Specifies the hardware and software prerequisites for operating the DAP-X3060.
Details the physical ports and indicator LEDs on the DAP-X3060 access point.
Provides instructions for powering up and initially configuring the access point.
Guides users through essential initial settings using a step-by-step wizard.
Introduces the web-based graphical interface for device configuration and monitoring.
Describes different wireless operational modes like AP, WDS with AP, and WDS.
Configures the device to function as a standard wireless access point (WLAN).
Configures the device for WDS bridging while maintaining access point functionality.
Configures the device for wireless bridging using the Wireless Distribution System (WDS).
Explains and configures wireless encryption standards like WEP and WPA.
Configures the Local Area Network (LAN) IP address and subnet mask for the access point.
Configures Internet Protocol version 6 (IPv6) addressing and connectivity.
Sets up the access point as a DHCP server for automatic IP address assignment.
Configures Virtual LANs (VLANs) for network segmentation and isolation.
Configures rules to filter network traffic based on IP addresses.
Introduces advanced configuration options for performance, security, and management.
Configures settings to optimize wireless signal strength and data transfer rates.
Optimizes wireless connection settings, including airtime fairness and band steering.
Sets up multiple Service Set Identifiers (SSIDs) for flexible wireless network management.
Configures guest access portals for authentication via web, username, or passcode.
Allows uploading custom web pages for the captive portal login experience.
Configures bypass rules for specific MAC addresses for network access control.
Manages and allocates bandwidth to wireless clients for fair usage.
Configures rules to manage uplink and downlink traffic speeds and priorities.
Prioritizes network traffic for different applications based on defined levels.
Creates rules to manage client traffic, including speeds and unlisted client handling.
Configures settings to detect and protect against wireless network intrusions.
Sets schedules for enabling or disabling wireless network access.
Optimizes wireless connection settings, including airtime fairness and band steering.
Provides an overview of device status, client information, and network statistics.
Displays firmware version, MAC addresses, and network interface parameters.
Lists details of currently connected wireless clients, including SSID, MAC, and signal.
Displays status and information for Wireless Distribution System (WDS) links.
Analyzes wireless channels to find optimal settings for performance and quality.
Provides statistics on Ethernet and WLAN traffic throughput and errors.
Manages system logs, view logs, and configure log server settings for troubleshooting.
Accesses maintenance functions like administration, firmware updates, and configuration backups.
Manages administrator access, system names, login credentials, and console settings.
Manages device restart, factory default restoration, and language pack clearing.
Manages firmware upgrades and SSL certificate installations for the access point.
Provides options for backing up and restoring device configurations.
Sets the device's time, date, and timezone using NTP or manual input.
Provides brief descriptions of access point functions and explanations.
Details the hardware and software specifications of the DAP-X3060 access point.
Visualizes antenna signal strength and coverage patterns in different planes.
Outlines FCC, ISED, and other regional compliance information for the device.
Specifies the energy consumption of the device in standby and operational modes.
To Next Page
