25D-Link DAP-X3060 User Manual
Wireless Resource
The Wireless Resource Control window is used to congure the wireless connection settings so that the device can detect the better wireless
connection in your environment.
Airtime Fairness: Click the drop-down menu to enable or
disable the airtime fairness function.
Band Steering: Click the drop-down menu to enable the
band steering function. When the wireless
clients support both 2.4GHz and 5GHz and
the 2.4GHz signal is not strong enough, the
device will use 5GHz as higher priority.
Wireless Band: Click the drop-down menu to select the
wireless band, 2.4GHz or 5GHz.
Connection Limit: Click the drop-down menu to enable or
disable the connection limit function. The
option is for load balancing. This determines
whether to limit the number of users
accessing this device. The exact number is
entered in the User Limit eld below. This
feature allows the user to share the wireless
network trac and the client using multiple
APs. If this function is enabled and when
the number of users exceeds this value, or
the network utilization of this AP exceeds
the percentage that has been specied, the
DAP-X3060 will not allow clients to associate
with the AP.
User Limit (0 - 128): This function is only available when
Connection Limit is enabled. Set the
maximum amount of users that are allowed
access (0 - 128 users) to the device using the
specied wireless band.
To Next Page
Loading...
Need help?
General
