EasyManuals Logo

D-Link DAP-X3060 User Manual

D-Link DAP-X3060
91 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #59 background imageLoading...
Page #59 background image
59D-Link DAP-X3060 User Manual
Section 3 - Conguration
This page allows the user to congure a WLAN Partition.
Wireless Band:
Link Integrity:
Ethernet WLAN Access:
Internal Station Connection:
Save:
Displays the current wireless band.
Select Enable or Disable. If the Ethernet
connection between the LAN and the AP is
disconnected, enabling this feature will cause
the wireless segment associated with the AP to
be disassociated from the AP.
The default is Enable. When disabled, all data
from the Ethernet to associated wireless devices
will be blocked. Wireless devices can still send
data to the Ethernet.
The default value is Enable, which allows stations
to intercommunicate by connecting to a target
AP. When disabled, wireless stations cannot
exchange data on the same Multi-SSID. In Guest
mode, wireless stations cannot exchange data
with any station on your network.
Click to save the updated configuration.
To make the updates permanent, click
Conguration > Save and Activate.
WLAN Partition

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DAP-X3060 and is the answer not in the manual?

D-Link DAP-X3060 Specifications

General IconGeneral
BrandD-Link
ModelDAP-X3060
CategoryWireless Access Point
LanguageEnglish

Related product manuals