D-Link DAP-X3060 User Manual

15D-Link DAP-X3060 User Manual
Section 3 - Conguration
Wireless Band:
Mode:
Network Name (SSID):
Auto Channel Selection:
Channel:
Channel Width:
AP MAC Address:
Select either 2.4GHz or 5GHz from the drop-down
menu.
WDS is selected from the drop-down menu.
Service Set Identier (SSID) is the name designated
for a specic wireless local area network (WLAN). The
SSID’s factory default setting is dlink. The SSID can
be easily changed to connect to an existing wireless
network or to establish a new wireless network.
Enabling this feature automatically selects
the channel that will provide the best wireless
performance. This feature is not supported in WDS
mode.
All devices on the network must share the same
channel. To change the channel, use the drop-down
menu to make the desired selection.
Allows you to select the channel width you would
like to operate in 2.4GHz and 5GHz. Use the drop-
down menu to choose 20 MHz or Auto 20/40 MHz
or Auto 20/40/80 MHz.
Enter the MAC addresses of the APs on your network
that will serve as bridges to wirelessly connect
multiple networks.
WDS Mode

D-Link DAP-X3060 Specifications

General

Brand	D-Link
Model	DAP-X3060
Category	Wireless Access Point
Language	English