D-Link DAP-X3060 User Manual

58D-Link DAP-X3060 User Manual
Section 3 - Conguration
Filters
This page allows the user to congure Wireless MAC ACL settings for access control.
Wireless Band:
Access Control List:
SSID Index:
MAC Address:
MAC Address List:
Current Client
Information:
Upload File:
Load MAC File to Local
Hard Driver:
Save:
Displays the current wireless band rate.
Select Disable to disable the lters function.
Select Accept to accept only those devices with MAC addresses in the
Access Control List. All other devices not on the list will be rejected.
Select Reject to reject the devices with MAC addresses on the Access
Control List. All other devices not on the list will be accepted.
Click the drop-down menu to select the SSID for the specied wireless
band.
Enter each MAC address that you wish to include in your lter list, and
click Apply.
When you enter a MAC address, it appears in this list. Highlight a MAC
address and click Delete to remove it from this list.
This table displays information about all the current connected stations.
To upload an ACL list e, click Browse and navigate to the ACL list le
saved on the computer, and then click Upload.
To download the ACL list, click Download and to save the ACL list.
Click to save the updated conguration. To make the updates
permanent, click Conguration > Save and Activate.
Wireless MAC ACL

D-Link DAP-X3060 Specifications

General

Brand	D-Link
Model	DAP-X3060
Category	Wireless Access Point
Language	English