D-Link DAP-X3060 - IPv6 Network Settings

21D-Link DAP-X3060 User Manual
Section 3 - Conguration
IPv6
Enable IPv6:
Get IP From:
IPv6 Address:
Prex:
Default Gateway:
Check to enable IPv6
Dynamic IP is chosen here. Choose this option the
DAP-X3060 can get IPv6 address automatically
or use Static to set IPv6 address manually.
When Auto is selected, the other elds here will be
grayed out.
Enter the LAN IPv6 address used here.
Enter the LAN subnet prex length value used here.
Enter the LAN default gateway IPv6 address used here.