Technical Support Setup Procedure
Page | 2
How Setup DAP-1620 as Access Point?
Step 1: Copy down the wireless name and password that was on the sticker of the device.
Step 2:
a) Plug DAP-1620 direct to power outlet
b) Connect LAN Cable from DAP-1620 to LAN port of the Router.
Step 3: Click on the Computer Icon on the right bottom side of the Windows. Select the
Wireless network name that was copy down.
Step 4: Enter the Wifi Password which had copy down earlier on. Click on OK.
--- END ---
To Next Page
Loading...
