To Next PageTo Next Page
Need help?Do you have a question about the D-Link DAP-1635 and is the answer not in the manual?
General| Operating Humidity | 10% to 90% non-condensing |
|---|---|
| Device Type | Wi-Fi Range Extender |
| Wireless Standards | IEEE 802.11ac, IEEE 802.11n, IEEE 802.11g, IEEE 802.11b |
| Frequency Band | Dual Band (2.4 GHz and 5 GHz) |
| Antennas | 2 x external antennas |
| Security | WPA, WPA2 |
| Button | WPS button |
| Operating Temperature | 0 to 40 °C (32 to 104 °F) |
| Maximum Speed | 1200 Mbps (300 Mbps + 867 Mbps) |
| Ethernet Ports | 1 x Gigabit Ethernet port |
Lists the items included in the DAP-1635 package, including the main unit and configuration card.
Explains that the DAP-1635 extends wireless coverage via wireless or Ethernet, and shows a diagram of its use.
Details the step-by-step process for setting up the DAP-1635 using the WPS feature on a router.
Guides users on setting up the DAP-1635 using the D-Link QRS Mobile application on a smartphone.
Explains how to configure the DAP-1635 through a web browser by accessing its local IP address.
Explains the meaning of the Smart Signal LEDs and provides guidance on optimizing extender location for better signal.
Addresses common setup issues, including resetting the device to factory defaults and recovering forgotten Wi-Fi credentials.
Details D-Link's offer to provide source code for software licensed under GPL and LGPL upon written request.
