Need help?Do you have a question about the D-Link DAP-1755 and is the answer not in the manual?
General| Device Type | Wireless Range Extender |
|---|---|
| Wireless Standard | 802.11ac |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Ethernet Ports | 1 x Gigabit Ethernet |
| WPS Support | Yes |
| Operating Modes | Range Extender, Access Point |
| Maximum Wireless Speed | 1300 Mbps (5 GHz) + 450 Mbps (2.4 GHz) |
| Security | WPA/WPA2 |
| Antennas | 3 x External Antennas |
Details revisions made to the manual over time.
Lists registered trademarks and product names mentioned in the manual.
Information regarding the product's energy consumption and standby mode.
Lists all items included in the product packaging.
Specifies the necessary hardware and software for setup and operation.
Provides an overview of the DAP-1755's features and capabilities.
Explains the functionality and purpose of a wireless range extender.
Details the physical layout, ports, and indicators of the DAP-1755.
Explains the meaning of various LED states for device status and WPS.
Describes the reset button, power switch, and LAN port on the device's bottom.
Indicates where to find essential network information like SSID and password on the device.
Guidelines for optimal placement and environmental factors for wireless setup.
Step-by-step instructions for physically connecting and powering on the device.
How to interpret the signal indicator to determine connection quality.
A guided process for initial wireless network setup and configuration.
Options to configure the extended wireless network's SSID, password, and security.
Settings for selecting and connecting to the existing network (Wi-Fi or Ethernet).
Feature to simplify network management by combining bands, or options to disable it.
Configuration of IP addresses, DNS servers, and management interface URL.
Settings for time zone, NTP server, and automatic time synchronization.
Ability to create schedules for turning features on/off automatically.
Set administrator password and manage LED status lights.
Save/load configuration, reset to factory defaults, or reboot the device.
Information and steps for updating the device's firmware.
View statistics on wireless and network connection traffic.
Steps to set up Wi-Fi Mesh using the D-Link Wi-Fi mobile application.
Instructions for configuring Wi-Fi Mesh using a wired Ethernet connection.
Guide to connect a Windows 10 computer to the extended network.
Guide to connect a Windows 8 computer to the extended network.
Steps to resolve issues when unable to access the device's configuration interface.
FCC compliance statement regarding potential radio interference.
Statement on FCC limits for radiation exposure for the device.
ISED compliance statement for Canadian radio standards.
Statement on ISED limits for radiation exposure for the device.
Declaration of the product's compliance with relevant EU directives.
General safety guidelines for personal safety and product protection.
To Next Page
