AirPremier N Dual Band PoE Access Point Command Line Interface Manual
24
8
LIMIT ADMINISTRATOR COMMANDS
Limit Administrator Commands Description
get ladtype Limited administration type
get ladvid VLAN ID which can control device
get ladippool Starting IP of the limited administration IP pool
set ladtype Limited Administration Type
set ladtype 0 Limited Administration disabled
set ladtype 1 Administration with VID
set ladtype 2 Administration with limited IP address
set ladtype 3 Both VID and IP address
set ladvid VLAN ID which can control device
set ladippool Starting IP of the limited administration IP pool
Note: The DHCP server function is to assign Dynamic IP to Wireless Client devices. It does not assign IP to an Ethernet port.
To Next Page
Loading...
