AirPremier N Dual Band PoE Access Point Command Line Interface Manual
26
10
MULTIPLE SSID AND VLAN COMMANDS
Multiple SSID and VLAN
Commands
Description
set multi-auth Set Authentication Type of Multi-SSID[index]
set multi-auth open-system Set authentication type to Open-System
set multi-auth wpa-eap Set authentication type to WPA-EAP
set multi-auth wpa-psk Set authentication type to WPA-PSK
set multi-auth wpa2-eap Set authentication type to WPA2-EAP
set multi-auth wpa2-psk Set authentication type to WPA2-PSK
set multi-auth wpa-auto-eap Set authentication type to WPA/WPA2-EAP
set multi-auth wpa-auto-psk Set authentication type to WPA/WPA2-PSK
set multi-auth shared-key Set authentication type to Shared-Key
set multi-cipher Set Cipher type of Multi-SSID[index]
set multi-cipher no Disable wireless security
set multi-cipher wep Set cipher of WEP
set multi-cipher aes Set cipher of AES
set multi-cipher tkip Set cipher of TKIP
set multi-cipher auto Set cipher of auto (AES/TKIP)
get groupvid_primary Display wlan port member of group VID
get groupvid_eth Display LAN port member of group VID
get groupvid_sys Display System port member of group VID
get multi-auth Display authentication type of Multi-SSID [index]
To Next Page
Loading...
