AirPremier N Dual Band PoE Access Point Command Line Interface Manual
42
The following is an example in which the authentication is set to WPA-EAP.
WAP-> set authentication wpa-eap
WAP-> set cipher auto
WAP-> set radiusip 192.168.0.88
WAP-> set radiussecret
WAP-> set apply
The following is an example in which the authentication is set to WPA2-EAP.
WAP-> set authentication wpa2-eap
WAP-> set cipher auto
WAP-> set radiusip 192.168.0.88
WAP-> set radiussecret
WAP-> set apply
The following is an example in which the authentication is set to WPA2-PSK.
WAP-> set authentication wpa2-psk
WAP-> set cipher auto
WAP-> set passphrase 1234567890
WAP-> set apply
To Next Page
Loading...
