D-Link DAP-400P - Hardware Specifications Overview; Device Components and Interfaces

DAP-400P Quick Installation Guide
SPECIFICATIONS
*
Hardware
Processor
· MT7621AT (880MHz, dual core)
RAM
· 128MB, DDR3 SDRAM
Flash
· 16MB, SPI
Interfaces
· 10/100/1000BASE-T WAN port with PoE support
· 10/100/1000BASE-T LAN port
LEDs
· POWER / WLAN
· INTERNET
· LAN
Buttons
· RESET button to restore factory default settings
Antenna
· Two internal antennas for 2.4GHz (3dBi gain)
· Two internal antennas for 5GHz (3dBi gain)
MIMO
· 2 x 2, MU-MIMO
Power connector
· Power input connector (DC)
Software
Operation Modes
· Access point
· Router
WAN connection types
· PPPoE
· IPv6 PPPoE
· PPPoE Dual Stack
· Static IPv4 / Dynamic IPv4
· Static IPv6 / Dynamic IPv6
· PPPoE + Static IP (PPPoE Dual Access)
· PPPoE + Dynamic IP (PPPoE Dual Access)
· PPTP/L2TP + Static IP
· PPTP/L2TP + Dynamic IP
* The device features are subject to change without notice. For the latest versions of the
firmware and relevant documentation, visit www.dlink.ru.
38