D-Link DCS-4602EV

D-Link DCS-4602EV Quick Installation Guide
12
ENGLISH
If you are using PoE to power your camera, use the
attached rubber power connector cover to seal the power
connector.
If you are using a power adapter(not included) to
power your camera, wind waterproof tape around the
connection in an overlapping manner to cover it.
Screw the back part of the waterproof connector clockwise
until there is a tight seal around the Ethernet cable.
Additional Information
Additional help and product information is available online at http://www.dlink.com.
Warranty Information
Please visit http://warranty.dlink.com/ for warranty information for your region.