D-Link DCS-5220 Quick Install Guide

3 D-Link DCS-5220 Quick Install Guide
Hardware Overview
Hardware Overview
Power LED
As soon as the power adapter is connected to the camera, the red LED and the
green LED light will both appear steady on. As the camera is booting, a ashing
red LED and steady green LED light will appear next.
The red LED will be turned off during self-test. Upon passing the self-test, a
steady red LED and ashing green LED light will appear, indicating a good
connection to the Ethernet port.
Antenna
One antenna is included with the DCS-5220. It is fastened onto the antenna
connector located on the back panel, which is used to provide a connection
with a wireless network.
Microphone
The DCS-5220 Internet
Camera has a built-in
internal microphone.

D-Link DCS-5220 Specifications

Operating Environment

operating temperature	0˚ to 40˚C (32˚- 104˚F)
storage temperature	-40˚ to 70˚C (-14˚ - 158˚F)
humidity	Max. 95% RH

Power

external power supply	12V DC 1.5A
power consumption	4.8 Watts

Camera Specifications

cmos sensor	1/4”
minimum illumination	0.5 Lux @ F2.0
viewing angle horizontal	270º
viewing angle vertical	90º

Video and Audio

video resolution at 160x120	Up to 30fps
video resolution at 176x144	Up to 30fps
video resolution at 320x240	Up to 30fps
video resolution at 640x480	Up to 30fps
audio bitrate AAC	16kbps~128kbps
audio bitrate GSM-AMR	4.75kbps~12.2kbps

Weight and Dimensions

width	4.1”
height	4.4”
depth	4.3”
item weight	0.7 lbs
packaging weight	2.9 lbs