16D-Link DCS-8300LHV2 User Manual
Section 3 - mydlink
1 Device Name Tap to change the device’s name.
2 Privacy Mode Tap to enable. Privacy mode will disable the camera feed.
3
Motion and Person
Detection
Tap to set the Motion and Person Detection area and sensitivity settings.
4 Storage
Tap to change the video clips storage location from the microSD card to the
cloud. You can also subscribe to mydlink Cloud from here and view your
current subscription plan.
5 Camera Microphone
Tap to enable or disable picking up sound near your camera in live view
and recordings.
6 Night Vision Tap to change night vision detection to On, O or Auto.
7 Anti-Flicker
Reduces icker in the video. Tap 50 Hz or 60 Hz depending on the frequency
of your lights.
8 Status LED Disabling this will turn o the LED until you turn it back on.
9 Designated Contact
Tap here to add, remove, or edit designated contacts that appear in the
rich notication.
10 Wi-Fi
Tap to see the current wireless network. Note: Tap Remove Device
or press the reset button if you want to change wireless networks.
11 Time Zone Select the time zone to calibrate your device to.
12 Firmware
This displays the installed version of the rmware on your device. Tap to enter
the update settings. You can choose the most suitable time for automatic
updates.
13 MAC ID Identies the device for support issues.
14 Remove Device Tap this button to disconnect this device from your mydlink account.
2
3
4
5
6
7
8
9
10
11
13
14
12
1
To Next Page
Loading...
Need help?
General
Weight and Dimensions
