DCS-8325LH
10
ENGLISH
?
FAQ
What do I do if my device is not working properly?
Reset the device and reinstall it. To reset your device, use a paper clip to
press and hold the recessed Reset button until the LED turns solid red.
During installation, ensure that:
• your router is connected to the Internet and has Wi-Fi enabled
• your mobile device is connected to your router Wi-Fi and has
Bluetooth enabled
• your mydlink device is in range of your Wi-Fi network
Why is there a white haze when viewing in night vision mode?
When viewing in night vision mode, the IR lights on your camera may
be reflecting off a nearby surface. Try repositioning your camera to
avoid glare from IR LEDs.
How can I use voice commands to control my device?
The device will work with both Amazon Alexa and the Google Assistant.
For setup instructions on these services, visit the following websites:
Alexa:
dlink.com/en/alexa
The Google Assistant:
dlink.com/en/google-assistant
Why is my microSD card not working/not supported?
The microSD card must be formatted into the correct file system (FAT32)
before it can be used with this product. This can be done in the mydlink
app by selecting the Format function in the storage menu under the
Device settings.
To Next Page
Loading...
