11D-Link DCS-900 User Manual
Section 2 - Installation
Security
To ensure the highest security and prevent unauthorized usage of the DCS-900, the Administrator has the exclusive
privilege to create all users. The DCS-900 supports multi-level password protection/access that can be restricted
by the Administrator for defined users who have a User Name and Password.
The Administrator can release a public User Name and Password so that when remote users access the DCS-900
they will be allowed to view the images transmitted by the DCS-900.
Note: When the DCS-900 is used for the first time, it is highly recommended that the Administrator set the
Admin ID and Admin Password to restrict user access to the DCS-900 since the default settings are Null String
(no password). Once the ID and Password are defined, only the Administrator has access to the management of the
DCS-900. This procedure should be done as soon as possible since the security features of the DCS-900 will not be
enabled until the Admin ID and Admin Password is defined.
To Next Page
Loading...
