D-Link DCS-900

28D-Link DCS-900 User Manual
Section 3 - Configuration
This is the domain name or IP address of your
external e-mail server.
This is the e-mail address of the person sending
the camera snapshots.
This is the e-mail address of recipient for the
SMTP server.
If the SMTP server uses authentication you
must enter your user name here.
This is the password that you use with your user
name to connect to the SMTP server.
Choosing always will start sending snapshots
to the recipient’s e-mail account right away.
Choosing schedule will give you a choice
as to when to start sending snapshots to the
recipient’s e-mail account by the day, as well as
what time this should start and when to stop.
The frequency of the snapshot interval can also be configured from 1 to 65535 seconds.
SMTP Sever
Address:
Receiver e-mail
Address:
Sender e-mail
Address:
User Name:
Password:
Enable e-mail
image to e-mail
account:
Interval:
Email