68D-Link DCS-900 User Manual
Section 6 - Troubleshooting
The PING (Packet Internet Groper) command can determine whether a specific IP Address is accessible by sending
a packet to the specific address and waiting for a reply. It is a very useful tool to confirm if the IP Address conflicts with
the Internet Camera over the network.
Follow the step-by-step procedure below to utilize
the PING command.
Open a DOS window Start>Program>Accessories>
Command Prompt
Type ping x.x.x.x, where x.x.x.x is the IP Address of
the Internet Camera.
A successful connection to the camera will be
indicated by 4 reply statements (below).
If you fail to connect to your camera you will see the
following:
Check to see if you have entered your camera’s
IP Address correctly or reassign your camera’s IP
Address.
How to Ping your IP Address
To Next Page
Loading...
