16D-Link DCS-900 User Manual
Section 2 - Installation
Enter an IP Address and Subnet Mask for your camera if you want to
change the current settings. Enter your Gateway and DNS settings. These
settings must correspond with your network settings for you to access the
camera. If you are unsure of what these settings should be, check with your
network administrator.
If you are connecting to a router, the Gateway and DNS 1 entries should
be the IP address of your router.
If you need to make any changes, click Back to modify your settings.
Otherwise, click Restart to save your settings.
Click Next
Click Restart
To Next Page
Loading...
