D-Link DES-1228/ME - Page 144

DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
140
show 802.1p user_priority
Purpose
Used to display the current mapping between an incoming packet’s 802.1p priority value
and one of the Switch’s four hardware priority queues.
Syntax
show 802.1p user_priority
Description
This command is used to display the current mapping of an incoming packet’s 802.1p
priority value to one of the Switch’s four hardware priority queues.
Parameters
None.
Restrictions
None.
Example usage:
To display 802.1p user priority:
DES-1228/ME:5#show 802.1p user_priority
Command: show 802.1p user_priority
QOS Class of Traffic
Priority-0 -> <Class-1>
Priority-1 -> <Class-0>
Priority-2 -> <Class-0>
Priority-3 -> <Class-1>
Priority-4 -> <Class-2>
Priority-5 -> <Class-2>
Priority-6 -> <Class-3>
Priority-7 -> <Class-3>
DES-1228/ME:5#