D-Link DES-1228/ME - Command History Commands

DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
363
46
COMMAND HISTORY COMMANDS
The Command History commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table:
Command Parameters
?
dir
config command_history <value 1-40>
show command_history
Each command is listed, in detail, in the following sections:
?
Purpose
Used to display all commands in the Command Line Interface (CLI).
Syntax
? {<command>}
Description
This command is used to display all of the commands available through
the Command Line Interface (CLI).
Parameters
{<command>} – Entering the question mark with an appropriate
command will list all the corresponding parameters for the specified
command, along with a brief description of the commands function and
similar commands having the same words in the command.
Restrictions
None.